Western Digital 2TB User Manual download pdf (Page 29)

MY BOOK VELOCIRAPTOR DUO

USER MANUAL

REPLACING A DRIVE – 25

11. Close the top cover and firmly push down on the top cover button until it snaps into

place:

12. If the WD Drive Utilities software is not already running, click Go > Applications >

WD Drive Utilities to display the WD Drive Utilities screen (see Figure 3 on page 9).

13. Reconnect the AC adapter cable to the power connector on the back of the device

enclosure.

14. Reconnect the Thunderbolt cables.

15. Depending on the configuration of your device:

If your device is configured as . . . THEN . . .

A striped RAID 0 disk array The Finder listing and desktop icon for your

My Book

VelociRaptor Duo device do not

reappear. In this case:

a. If you have more than one supported device

connected to your computer, select the one

with the drive you replaced on the WD Drive

Utilities screen and click RAID Management

> Status to display the device status.

b. Verify that the status display shows:

• Current Configuration - Stripe

• RAID Status - Offline

• Drive A Status and Drive B Status -

Unknown for the drive that you replaced

and Online for the other drive

This indication means that you must

reconfigure your striped RAID 0 disk array.

(Continued)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 37 38

No comments

Western Digital 2TB User Manual Page 29